Metal in Oil Filter After First Change (Raptor 350)
#1
Metal in Oil Filter After First Change (Raptor 350)
2005 Raptor 350. I ran it past break in plus another 3-4 hours. I went to change the oil and found aluminum shavings in the filter. There were also metal shavings (i used a magnet). I was wondering if this is normal for the first oil change or if something may be wrong.
#2
Metal in Oil Filter After First Change (Raptor 350)
it seems to be normall for all warrior motors to have metal filings in the oil filter when u change the oil.. seems to happen all the time.. i had a lot of metal in my filter once.. but that was b/c the lower rod bearing went out.. but it does seem normail for these motors to have metal in hte filter
#5
#6
Metal in Oil Filter After First Change (Raptor 350)
well like in my recon they said its from striping gears (i striped them on purpose for wheelies) you might not be shifting correctly but if you know you are im not sure but my tip is call yamaha tell them the problem and they are gonna say "bring it in to us and let us look at it" tell them you wont have time your going on vacatin and whats the problem lol i hate dealers
#7
Metal in Oil Filter After First Change (Raptor 350)
Originally posted by: static2229
2005 Raptor 350. I ran it past break in plus another 3-4 hours. I went to change the oil and found aluminum shavings in the filter. There were also metal shavings (i used a magnet). I was wondering if this is normal for the first oil change or if something may be wrong.
2005 Raptor 350. I ran it past break in plus another 3-4 hours. I went to change the oil and found aluminum shavings in the filter. There were also metal shavings (i used a magnet). I was wondering if this is normal for the first oil change or if something may be wrong.
Trending Topics
#8
Thread
Thread Starter
Forum
Replies
Last Post
cody500ho
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
14
08-14-2015 05:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)