name that noise!!
#1
#4
name that noise!!
Originally posted by: Rider1169
today i started up my raptor(after it was warm) and went to take off and it stalled before i let out the clutch and made a loud clinging noise, like metal on metal. then it started up and ran like normal. what could this be?
today i started up my raptor(after it was warm) and went to take off and it stalled before i let out the clutch and made a loud clinging noise, like metal on metal. then it started up and ran like normal. what could this be?
#7
name that noise!!
Originally posted by: BigBubba
That would be the starter clutch my good friend...better watch that really close or replace it with the L&A one way before it goes out completly.
That would be the starter clutch my good friend...better watch that really close or replace it with the L&A one way before it goes out completly.
I waited,,,,and my bolts that hold my 1 way gear in place sheared off causing damage to my cam chain. Now I need to pull my top end.
If I had it to do over,,,I wish I had gone in and used some loctite on those bolts. They had loosened over time and you could see the wear from the kickback/stalling had taken its toll. (the 1 way gear was still in good shape)
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
jrooker6
Polaris
18
04-23-2016 07:36 PM
mrtidy
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
02-03-2016 05:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)