Is there a site that will give the torque specifications for the bolts on a Raptor? The manual gives some of this onfo but not all of it. Specificially I am looking to see if there is recommended ft/lb for the handlebars but it would be nice to have a listing of all the recommended ft/lbs.

On a related note, I have an 04 raptor that I have ridden ~10 times. The first few were just putting around but the rest I would say moderately aggressive. Anyways I noticed that the bottom two bolts that hold my handlebars on were VERY loose. I could turn one of them with my fingers, the other was not much tighter.
Could this have vibrated loose or is there a chance that is was not assembled as well as it should have been?

 

Chances are the tech didn't tighten your handlebars correctly.
Mine have never come loose and I ride the hell out of it.......

 

Check these guys out. Sand Wizards Racing then under the tips and tricks section there are service manuals. download the pdf and its all inside. they have some good info.