Flags, what materials?
Feb 6, 2005 | 11:33 PM
#11
Thread Starter
|
Elite Pro Rider
Is A Power Sport Junkie!
Is A Power Sport Junkie!
Joined: Jul 2003
Posts: 5,400
Likes: 0
From: Indiana
Flags, what materials?
Originally posted by: Hippyhunter
AHA! THATS MAKES SENCE THEN.
MAYBE USED DUNE BUGGY WHIP MADE OF STAINLESS STEEL ON A SPRING WOULD BE GOOD AND TOUGH. I HAVE TWO KINDS ONE THAT BREAKS AND ONE THAT DOES NOT. BREAKS IS MOUNTED IN A DRILLED BOLT HEAD AND IS JUST AN EPOXY'D FIBERGLASS SHAFT INTO THE BOLT HEAD. THE OTHER WHICH WORKS AND DOES NOT BREAK IS A SPRING BASED FIBERGLASS SHAFT.
NEITHER ONE IS QUIK-RELEASE THO. (NUT n BOLT)
WHATS THE BEST QUIK-RELEASE OUT THERE GUYS?
AHA! THATS MAKES SENCE THEN.
MAYBE USED DUNE BUGGY WHIP MADE OF STAINLESS STEEL ON A SPRING WOULD BE GOOD AND TOUGH. I HAVE TWO KINDS ONE THAT BREAKS AND ONE THAT DOES NOT. BREAKS IS MOUNTED IN A DRILLED BOLT HEAD AND IS JUST AN EPOXY'D FIBERGLASS SHAFT INTO THE BOLT HEAD. THE OTHER WHICH WORKS AND DOES NOT BREAK IS A SPRING BASED FIBERGLASS SHAFT.
NEITHER ONE IS QUIK-RELEASE THO. (NUT n BOLT)
WHATS THE BEST QUIK-RELEASE OUT THERE GUYS?
Feb 7, 2005 | 03:52 AM
#12
Quad Patrol
Joined: Dec 2003
Posts: 15,213
Likes: 0
Flags, what materials?
Originally posted by: Speedy2222
STOP POSTING IN CAPS!! IT"SHARDERTOREADTHANIFIDON"TUSEASPACEBAR!!!
Originally posted by: Hippyhunter
AHA! THATS MAKES SENCE THEN.
MAYBE USED DUNE BUGGY WHIP MADE OF STAINLESS STEEL ON A SPRING WOULD BE GOOD AND TOUGH. I HAVE TWO KINDS ONE THAT BREAKS AND ONE THAT DOES NOT. BREAKS IS MOUNTED IN A DRILLED BOLT HEAD AND IS JUST AN EPOXY'D FIBERGLASS SHAFT INTO THE BOLT HEAD. THE OTHER WHICH WORKS AND DOES NOT BREAK IS A SPRING BASED FIBERGLASS SHAFT.
NEITHER ONE IS QUIK-RELEASE THO. (NUT n BOLT)
WHATS THE BEST QUIK-RELEASE OUT THERE GUYS?
AHA! THATS MAKES SENCE THEN.
MAYBE USED DUNE BUGGY WHIP MADE OF STAINLESS STEEL ON A SPRING WOULD BE GOOD AND TOUGH. I HAVE TWO KINDS ONE THAT BREAKS AND ONE THAT DOES NOT. BREAKS IS MOUNTED IN A DRILLED BOLT HEAD AND IS JUST AN EPOXY'D FIBERGLASS SHAFT INTO THE BOLT HEAD. THE OTHER WHICH WORKS AND DOES NOT BREAK IS A SPRING BASED FIBERGLASS SHAFT.
NEITHER ONE IS QUIK-RELEASE THO. (NUT n BOLT)
WHATS THE BEST QUIK-RELEASE OUT THERE GUYS?
Forum Rules:
1.4 Posting of messages using all capital letters is considered impolite and should be avoided.
Feb 7, 2005 | 01:49 PM
#14
Pro Rider
Joined: Mar 2004
Posts: 717
Likes: 0
Flags, what materials?
that T.P. joke was pretty humerous though, you have to admit it!!!!!!!!!!!!
i laughed good, only because here at work we got a new plotter that takes paper rolls and the size they ordered is too big and rather than exchanging them they cut 10" off of them to make them work.
it reminded me of that!!!!!!!!!!
i laughed good, only because here at work we got a new plotter that takes paper rolls and the size they ordered is too big and rather than exchanging them they cut 10" off of them to make them work.
it reminded me of that!!!!!!!!!!
Feb 7, 2005 | 02:00 PM
#16
Range Rover
Joined: Jan 2004
Posts: 119
Likes: 0
Flags, what materials?
Yo speedy...... If I remember right you go to the Badlands ORV Park. They have flags there that arent to expensive.... $10 for the small one and $15 for the big one. If you break it there then they will fix it for $2. That seems alot easier then what your going through right now tryin to find material. I have several from there because I always seem to leave home; get about half way there, before I remember that I need a flag to ride there...LOL. If ya still wanna make your own then I would reccomend that you use JB Weld to hold the fiberglass into the sleeved bolt.... it works great.
Feb 7, 2005 | 05:06 PM
#17
Thread Starter
|
Elite Pro Rider
Is A Power Sport Junkie!
Is A Power Sport Junkie!
Joined: Jul 2003
Posts: 5,400
Likes: 0
From: Indiana
Flags, what materials?
Originally posted by: IndyPred
Yo speedy...... If I remember right you go to the Badlands ORV Park. They have flags there that arent to expensive.... $10 for the small one and $15 for the big one. If you break it there then they will fix it for $2. That seems alot easier then what your going through right now tryin to find material. I have several from there because I always seem to leave home; get about half way there, before I remember that I need a flag to ride there...LOL. If ya still wanna make your own then I would reccomend that you use JB Weld to hold the fiberglass into the sleeved bolt.... it works great.
Yo speedy...... If I remember right you go to the Badlands ORV Park. They have flags there that arent to expensive.... $10 for the small one and $15 for the big one. If you break it there then they will fix it for $2. That seems alot easier then what your going through right now tryin to find material. I have several from there because I always seem to leave home; get about half way there, before I remember that I need a flag to ride there...LOL. If ya still wanna make your own then I would reccomend that you use JB Weld to hold the fiberglass into the sleeved bolt.... it works great.
Thread
Thread Starter
Forum
Replies
Last Post
Elkaholic
Land, Trail and Environmental Issues
1
Sep 6, 2015 02:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
