Realistic Raptor HP gain????
#23
Realistic Raptor HP gain????
Originally posted by: 86LT250RFatty
I know, you told me 3 times [img]i/expressions/face-icon-small-wink.gif[/img]
I know, you told me 3 times [img]i/expressions/face-icon-small-wink.gif[/img]
The forums were kinda messing up on me, I kept getting error messages, and it didn't appear that my posts were getting applied to the board.[img]i/expressions/face-icon-small-shocked.gif[/img]
#24
#28
#29
Realistic Raptor HP gain????
hey maybe you could help me. i was wondering if you know about what size jet i would need if i was running a pro circuit t-4 pipe? i was going to put a few holes in the air box or take it away all together. i live at 3500 feet if that helps.
thanks alot for the help.
thanks alot for the help.
#30
Realistic Raptor HP gain????
Originally posted by: dsyfz450
hey maybe you could help me. i was wondering if you know about what size jet i would need if i was running a pro circuit t-4 pipe? i was going to put a few holes in the air box or take it away all together. i live at 3500 feet if that helps.
thanks alot for the help.
hey maybe you could help me. i was wondering if you know about what size jet i would need if i was running a pro circuit t-4 pipe? i was going to put a few holes in the air box or take it away all together. i live at 3500 feet if that helps.
thanks alot for the help.
DR D slip-on
Lid removed
Sea level, 50-70 degrees F
172 main
45 pilot
stock needle 5th clip
Fuel screw 2 1/2 turns out
Try those settings first, and see how it responds. Use the above post on how to set your fuel screw. You have a different pipe than me, but I imagine that will get you close. You will need to fine tune it for your set-up, and riding conditions.
Hope that helps.
Thread
Thread Starter
Forum
Replies
Last Post
Alex Rodak
ATV Videos
2
09-13-2015 12:30 AM
Alex Rodak
Yamaha
0
09-12-2015 09:39 AM
Alex Rodak
Introduce Yourself
0
09-11-2015 11:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)