How do i remove warrior stator cover
#1
How do i remove warrior stator cover
To make a long story short I thought I blew my gears out on my warrior but it was something very simple that i overlooked. Everything is running fine but after I started to take some things apart, once i put them back together I noticed oil was leaking out of my stator cover side on the bottom. When i was trying to remove it, it would only come out about a half inch then felt like it was being pulled back in by a spring or something. I have to get this piece off because the the gasket is messed up and it will not seal properly causing the slow leak. Am I missing something with taking this thing apart. It there some other step i need to do to get it apart, i dont want to pry on it and cause more damage so any help would be greatly appreciated.
#2
How do i remove warrior stator cover
Originally posted by: FoxForma
To make a long story short I thought I blew my gears out on my warrior but it was something very simple that i overlooked. Everything is running fine but after I started to take some things apart, once i put them back together I noticed oil was leaking out of my stator cover side on the bottom. When i was trying to remove it, it would only come out about a half inch then felt like it was being pulled back in by a spring or something. I have to get this piece off because the the gasket is messed up and it will not seal properly causing the slow leak. Am I missing something with taking this thing apart. It there some other step i need to do to get it apart, i dont want to pry on it and cause more damage so any help would be greatly appreciated.
To make a long story short I thought I blew my gears out on my warrior but it was something very simple that i overlooked. Everything is running fine but after I started to take some things apart, once i put them back together I noticed oil was leaking out of my stator cover side on the bottom. When i was trying to remove it, it would only come out about a half inch then felt like it was being pulled back in by a spring or something. I have to get this piece off because the the gasket is messed up and it will not seal properly causing the slow leak. Am I missing something with taking this thing apart. It there some other step i need to do to get it apart, i dont want to pry on it and cause more damage so any help would be greatly appreciated.
#3
How do i remove warrior stator cover
That is the side I am talking about, so you think it is just the magnetic energy holding it together? I didn't think oil should of been in there also but apparently there is. The quad doesn;t smoke or anything so I assumed that is ok. SO should I just pry it apart then? Hope someone can clear this up so i dont really mess things up. Thanks
#4
How do i remove warrior stator cover
Originally posted by: FoxForma
That is the side I am talking about, so you think it is just the magnetic energy holding it together? I didn't think oil should of been in there also but apparently there is. The quad doesn;t smoke or anything so I assumed that is ok. SO should I just pry it apart then? Hope someone can clear this up so i dont really mess things up. Thanks
That is the side I am talking about, so you think it is just the magnetic energy holding it together? I didn't think oil should of been in there also but apparently there is. The quad doesn;t smoke or anything so I assumed that is ok. SO should I just pry it apart then? Hope someone can clear this up so i dont really mess things up. Thanks
#7
How do i remove warrior stator cover
yeah it's just got a strong magnet i had a small leak on mine right at the bottom put on a new gasket and would you know i cracked the cover when i put it back on[img]i/expressions/face-icon-small-frown.gif[/img] but now it back on the trails just be carful when putting it back on cause they aint made out of much!
Trending Topics
#8
#9
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)