Yamaha Discussions about Yamaha ATVs.

Looking into the Raptor

Thread Tools
 
Search this Thread
 
  #21  
Old 10-03-2000, 08:35 PM
coryatver's Avatar
Pro Rider
Join Date: Aug 1999
Posts: 518
Likes: 0
Received 0 Likes on 0 Posts
Default

Why don't you sell it and buy something else. I am sure there are a lot of people that want the awsome raptor.
 
  #22  
Old 10-03-2000, 08:58 PM
ZEBRATRAILER's Avatar
Range Rover
Join Date: Oct 2000
Posts: 135
Likes: 0
Received 0 Likes on 0 Posts
Default

THE RAPTOR IS AWESOME, IT JUST NEEDS SOME BUGS WORKED OUT.THE DIRT IS THE ONLY PROBLEM IVE HAD.
THIS MONTH IM GOING TO GLAMIS,AND SEE HOW BAD IT TEARS UP THE 400 & 650.
 
  #23  
Old 10-03-2000, 09:11 PM
x250rDude's Avatar
Pro Rider
Join Date: Apr 2000
Posts: 399
Likes: 0
Received 0 Likes on 0 Posts
Default

Im not sure why all of the problems.Ive had no problems at all with axels,a arms or motor problems and I also swamped mine over the seat with water(See my Im such a Dumbass post)and drove it back 7 miles with half water and half oil in the crankcase.She still runs strong as a bull on steroidsI love the Raptor and for all of you guys having problems I feel for ya,but for me no problems yet and would tell this fellow with the 400ex to sell,sell,sell as I did.
 
  #24  
Old 10-03-2000, 09:33 PM
RAPTOR1's Avatar
Range Rover
Join Date: Sep 2000
Posts: 107
Likes: 0
Received 0 Likes on 0 Posts
Default

I have had my raptor for 3 weeks now and it has been out 5 times. In mud, dust and even through engine high water. NO problems yet and I check the air box every time I am done riding. NOthing has gotten in there to date. The chain stays tight(other than the break in stretch). I did dent one arm on the bottom from catching a stump when coming down a fast hill. It is NOT bent and works fine for now. I am not defending the bike either trust me if I thought it was a pos I'd be the first to unload it. I can't believe how many people can't ride for ten minutes without bending an axle. Sunday I was jumping a 4 ft hight table top just to see if anything will break while under wty still. I got at the most 5ft of air landing pretty hard several times and took and rode it on the street where I can feel everything and its fine. maybe I'm just lucky? who knows
bottom line is I got and I ride it its fine
mike
01 blk/wht raptor (runs fine)
 
  #25  
Old 10-04-2000, 02:06 AM
TricKRaptoR's Avatar
Weekend Warrior
Join Date: Sep 2000
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default

This is what a Raptor is all about!!
2001 Blue Raptor
Over 30 Hours of riding time on it plus a 30 mile
H/S race 1st place and love it!!

97 Banshee (GONE!)

Mods on raptor to date.
Airbox
Twist throtle
Axis front shocks
Clutch lever & ebrake blockoff
ITP Racing wheels
Tires:Shredders rear & Bandits front
 
  #26  
Old 10-04-2000, 09:41 AM
garyc660R's Avatar
Elite Pro Rider
Join Date: Jan 2000
Posts: 6,996
Likes: 0
Received 0 Likes on 0 Posts
Default

I checked my crank case vent last night and it only pushes air. This design has been incorporated into previous Yamaha designs and have had no problems. Maybe check your air filter...if it is in upside-down it will not seal properly.
 
  #27  
Old 10-04-2000, 11:05 AM
Tripps's Avatar
Weekend Warrior
Join Date: Oct 2000
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Well, my experience thus far with the Raptor has been exceptional. It has been able to handle all I have thrown at it, including jumps and rough terrain. I have not had problems with the axles or suspension in general, in fact, I am a 260lb rider so my jumps should put stress on it. I have taken the bike out a few times now and did some serious hill climbing and dune running, no problems whatsoever.

Anyway, just thought I would throw in my 2 cents. Dont be afraid to get a Raptor, I am sure the problems you are hearing about are the exception and not the rule.

Tripps
'01 Yamaha Raptor
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bmxatv10
Yamaha
58
10-14-2022 06:23 PM
black_thunder
ATV Videos
0
09-22-2015 07:59 PM
Alex Rodak
ATV Videos
2
09-13-2015 12:30 AM
Alex Rodak
Yamaha
0
09-12-2015 09:39 AM
Alex Rodak
Introduce Yourself
0
09-11-2015 11:42 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Looking into the Raptor



All times are GMT -5. The time now is 11:47 PM.