i just got my new graphics kit today and am looking forward to putting it on. any one have any tips??

 

take ur time

 

soapy water!

 

Use a heat gun too.

 

yeah be patient take your time, get a squirt bottle fill it with warm soapy water. spray the area where graphic is to be applied with soapy water. spray both the plastic, and the adhesive side of the sticker. use a credit card or driver license to smooth out the lumps and get all the air bubbles out. i wrap my card in a paper towel to prevent scrathes. do one side at a time, also i recommend installing the seat over before you apply the graphics kit, post pics when you get-r-done.

 

hey CTracingraptor...is that photo of rapfans curtis sparks raptor on your photo page photoshopped or are those 2 identical raptors. they both have the same red shock covers, same bars, same 6pac rack, same pipe (i think), same casesaver and shifter, and some other stuff. if it is photoshopped someone did a very good job!!! i just find it hard to believe that there are two identical raptors in the same place and they just so happened to end up in one photo...on your page.

 

first of rapfam runs a craycraft730, but those identical sparks 690 belong to his dad and his uncle, and OMG are they f-ing FAST. no those photos are edited or photoshopped, they are identical raptors same year and purchased at the same time. Both raptors were sent to sparks for the 690 before they were EVER ridden, he purchased them and sent the motors straight to sparks, and didnt get them back for a year and a half, then he got to ride them. but hell eyah their are nice bikes, thats why their on their.