Yamaha Discussions about Yamaha ATVs.

warrior neutral.

Thread Tools
 
Search this Thread
 
  #1  
Old 12-03-2005 | 07:16 PM
paintballbanshee's Avatar
Thread Starter
|
Pro Rider
Joined: Jul 2005
Posts: 984
Likes: 0
Default warrior neutral.

hey people, i was riding my warrior and we all stopped and my neutral light wouldn't go on, all of my lights except for that wasn't working. then my quad wouldn't start while it was in neutral without the clutch. i brought it home after the ride and i saw a wire hanging were my left leg is, (in that area), it seems like it has to be the neutral light, i spent like half an hour looking at were it could go, it definitely comes out of the main harness near the battery and is heading towards the startor, i just cant find the male part of the plug. thank you i hope you can help me
 
  #2  
Old 12-03-2005 | 07:35 PM
Daniel631's Avatar
Range Rover
Joined: Nov 2005
Posts: 113
Likes: 0
Default warrior neutral.

The neutral switch is on the left side of the motor. Look near the shifter for a sensor looking thing with a male end on it.
 
  #3  
Old 12-03-2005 | 09:32 PM
paintballbanshee's Avatar
Thread Starter
|
Pro Rider
Joined: Jul 2005
Posts: 984
Likes: 0
Default warrior neutral.

does it look like a hook? im really trying to find this thing so ok its on the left side down low?
 
  #4  
Old 12-03-2005 | 10:17 PM
swampman's Avatar
Trailblazer
Joined: Apr 2001
Posts: 27
Likes: 0
Default warrior neutral.

its like a sensor and it is down low, I'm pretty sure a holds it on. the connector end of the wire should have a round eye. on the motor it should look like a stud sticking out where the connector end goes on. the rubber boot still might be covering it
 
  #5  
Old 01-05-2006 | 08:22 PM
trialsrider172's Avatar
Pro Rider
Joined: Dec 2005
Posts: 203
Likes: 0
Default warrior neutral.

maybe ur bulbs is dead...if all else fails, check that
 
  #6  
Old 01-19-2006 | 02:07 AM
extremeatvrider's Avatar
Trailblazer
Joined: Jan 2006
Posts: 26
Likes: 0
Default warrior neutral.

the sensor has single wire running to it look at oil filter cover should have wire ran next to back side of it follow the sensor if looking at quad from left side is right behide shift arm pull sensor out and clean it make sure the pin in it moves freely
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Reactant
General Chat
15
03-30-2022 03:08 AM
STLyamwar
Classifieds, Garage Sale & Swap Shop
1
07-25-2020 05:44 AM
Barnsnelbon
Yamaha
1
09-27-2015 04:07 AM
Bernhard
Yamaha
1
09-25-2015 01:45 PM
01ssls1
Introduce Yourself
4
09-22-2015 07:50 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: warrior neutral.



All times are GMT -5. The time now is 11:18 PM.