When i do an tranny fluid change i think im gunna switch from klotz to amsoil cause its cheaper and works just as well in my opinion. Just wondering if someone could link me or knows the name/weight of the stuff i should run.

 

I don't know. I run Klotz flex drive-30 and never had a problem. But you can use any oil equal to SAE10W30 motor oil.

 

I use 75W-90 in my 250r and Blaster. Heres a link Severe Gear 75W-90.

 

The 75x90 wont make the clutch slip? I was thinkin putting 0w40 in the shee cause i know its wet clutch compatible

 

It doesn't have friction modifiers in it. They have a limited slip additive for differentials on autos to prevent chatter in locking differentials. At first I used there 10W-40 for motorcycles in the transmission of the blaster and 250r, but it felt kinda of thin, like there wasn't any cushion between the gears . I haven't tried that 0W-40 in any transmissions. I use it in the engine off my Scrambler. It would probably be good in a transmision of a two stroke, but i haven't tried it so I don't know.