Sorry, i cant remember what i jetted it too. But you will HAVE to get one if you dont want to blow up!

And to wolvey450, i do got it made dont I!?!?!?!?!?!
there's roughly 2000 (it wont let me list much more, but i do have more, just not perfomance) in there and i paid for about 1300 of it, and i've only had it for a year and 28 days. gotta work hard.

 

Your daddys ds might go 80mph stock down a hill with heavy winds.The ds will go 75 tops on a good day kid.Im sorry to call you a liar but thats fast for a stock ds.I guess i could be wrong but all the stock ds's ive been around would go 68-72mph.On gravel straight away.

 

whats all this down a hill with heavy winds stuff???????????????? how fast does a raptor 700r s.e. go? at least ur not callin me a liar

 

and about 1800 of that money is very pourly spent

 

Well, here is what i have found to be true. The rappy 350 does damn near 70 mph stock...NOWHERE near hitting the rev limiter because it is plugged up a bit. Unplug it and give it 5-10 horses (if ten) and it will be revving a lot higher in 6th gear pinned. I clocked my z400 at 78 mph. Clocked a buddies of mine, its on my myspace. It has a Gtthunder mx pipe on it, increases power by at least 10 hp, has the lid taken off and is capable of bouncing off the rev limiter in every gear and hit 83. And i raced the stock z400 vs the raptor 350 with those mods
and the z pulled like a length on it up until they both were topped out, and the z started pulling away. That is my experience, dont believe it....I dont mind...But i believe this kid 100%.

 

lets see here
-pipe, need more HP, dad wouldnt let me touch motor
-filter, need to make more flow
-renthal bars, stock bend is stupid, and i'm tired of whacking my head on the bars
-computer, curious to how fast i'm going( not very accurate though)
-axle, dont want 2 tip over
-guards, i ride in streams with big rocks
-hand guards, i need better gloves on that one!
-nerfs,keep slippin
-graphics, i'm a sucker for stickers
-tires, need sand tires and stock had seen too many burnouts
-sprocket, need more bottom end pop without spending big $$$$$$$$$$$
-grips, needed new ones with bars, stock worn down to nothing
-bumper, trees move i swear!!!!!!!!!!
grips, i drive off my yard and i'm on the ice
-jet kit, needed with pipe
-+6 a-arm kit, needed to match front with rear, didnt want to drop $450 plus for +2 a-arms
go to www.diamondjcustoms.com to see what i'm talking about, its really cool and i got it for cheap

hope that shuts you up. lol

 

wtf kind of drugs are you on? mathmatically a raptor 350 won't do over 65 stock.. in ANY scenario.. unless you are driving it straight off a cliff

you'd have to have a 16 or 17 tooth front sprocket to get damn near 70mph on a raptor 350

and i know for a fact a pipe won't hadd atleast 10hp to a z400 and i know a z400 won't do 78

 

kyledvor61
Dude thanks for imput I appreciate it. I already got the pipe so I guess I will deal with it as we can. Besides he will like it on the loud side not sure I will. Listen looks like your getting your nuts busted a little hear. Get a hold of a hand held gps and run the hell out of your machine it will post your runs take a picture and post it to either answer your original question or shut up some people. I run boats real hard and thats what you have to do once in a while eeven know its all in good fun. Be well

 

stock bend is fine.. it's just a weak bar...

grips wear out.. proven fact
y did u buy paddles if u ride mainly on the road?
btw u don't need to rejet if u are running the quiet core
that +6 kit is the biggest load of garbage on the market.. you're an idiot for buying it

 

Hey, fasterthanyou22, you are gonna get some much crap for what you just said. Even I dont think my craptor 350 will hit 70 stock.

yes=1 no=3 hhhhhmmmm

i'm gonna check out the magnnet locations tommorrow.