warrior won't stay running
#1
warrior won't stay running
hey folks, my 93 yamaha warrior won't stay running .. checked the spark plug and it looks fine, going to change it anyways. it will start up but die right out afterwards .. sometimes it will staying running for a bit then die out. Sometimes i can rev it right up and it will stay running but eventually die out. check the gas hose to make sure it was getting air .. just cleaned the air filter. It started when i was running some big hills and jumping too. I worked the bike quite hard then at the end of our sess it started acting up. I also have an electrical problem. At first the negative connector was loose so i tightened it up and the neutal light would stay on but now i have to turn the key on then start it but this only works once, if i stalls i have to turn the key off then on again in order to start. anyways hope someone can help, its beautiful out and i can't ride [img]i/expressions/face-icon-small-sad.gif[/img]
#3
#6
warrior won't stay running
Sounds like you both have electrical problems. A problem I had with my Warrior one time was a wire going to the CDI in the back had rubbed the frame until the copper was touching the frame and grounded out. It would run for a while and then just die and wouldnt start back unless I shook the bike.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)