A few Timberwolf ?'s
#1
1. Can I get a set of spindles from a newer Timberwolf or Beartracker with disc brakes and convert the whole break system over to hydrualic disc brakes?
2. Where would be a good place to find a used rear diff for a Timberwolf cheap(Everyone always wants one cheap [img]i/expressions/face-icon-small-smile.gif[/img] )?
3. Does anyone know if wiseco or other companys offers oversized and high compression pistons for the 250?
4. What are the best power gains that can be made from this machine with slight to moderate upgrades?
2. Where would be a good place to find a used rear diff for a Timberwolf cheap(Everyone always wants one cheap [img]i/expressions/face-icon-small-smile.gif[/img] )?
3. Does anyone know if wiseco or other companys offers oversized and high compression pistons for the 250?
4. What are the best power gains that can be made from this machine with slight to moderate upgrades?
#2
1. I believe the T-wolf went from drum to disc back to drum, and had different suspensions with each.
2.Nothing is cheap, but here goes http://vincescycle.tripod.com/newparts/wolf.html
3. Dennis Kirk has a piston and carb upgrade. anything would be better than stock. (They run great, they run forever, they just run a little weak)
4. Good luck,
2.Nothing is cheap, but here goes http://vincescycle.tripod.com/newparts/wolf.html
3. Dennis Kirk has a piston and carb upgrade. anything would be better than stock. (They run great, they run forever, they just run a little weak)
4. Good luck,
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




