Rappy 660 no spark?!?!
#1
Just as title says... as i was riding one day... just putting around the house 1-3 gear easy throttle, just died.... I now have no spark. Got a new plug, Battery is good, and its gettin fuel and all... Any ideas?
#3
checked the ignition coil.... remember, im new to the ATV thing. But i got about 28v running into the ignition coil. Yet nothing coming out of the spark plug boot when i crank it over. This mean the coil is shot i take it?
#4
the only way u can check voltage on the coil is if u have a peak voltage adaptor for your multimeter, i would check resistance and insulation breakdown, insulation breakdown u should get OL on ur meter. the breakdown test is done by taking one lead to the primary side of the coil and to ground, if u get resistance, then the coil's bad, u can check the primary resistance by going from the primary side of the coil with a test lead, to the other side of the coil through the plug cap, you should get a reading with about 9 - 13 K ohms, if u get OL, then the coil is bad.
Thread
Thread Starter
Forum
Replies
Last Post
fordfaithful21
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
Dec 7, 2015 05:52 PM
Cdenton
Technical and How-To Articles
1
Sep 9, 2015 11:23 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



