Yamaha Discussions about Yamaha ATVs.

banshee problems

Thread Tools
 
Search this Thread
 
  #11  
Old 10-20-2007, 06:37 PM
T-daddy's Avatar
Trailblazer
Thread Starter
Join Date: Jul 2007
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Default banshee problems

didnt check yet gotta wait till 2morrow
 
  #12  
Old 10-20-2007, 06:52 PM
eddieo51's Avatar
Trailblazer
Join Date: Oct 2007
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Default banshee problems

[img]i/expressions/face-icon-small-smile.gif[/img]Ok,get the compression reading and go from there, I hope the owner before you rejetted it when he put the FMF exhuast on it Man I have seen to-many guys just put some PIPES on-em and ruin a good motor, or get-em where they dont run as good as a stock one, i think yamaha mite have it figured out!!!! They didnt change that motor >ANY< in 20 years,,1986=2006.IMO,,,,, Luck Eddie.
 
  #13  
Old 10-20-2007, 07:10 PM
T-daddy's Avatar
Trailblazer
Thread Starter
Join Date: Jul 2007
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Default banshee problems

basically wen u doin the test do u have 2 take out both spark plugs and connect compression tester two one side and kick it into the needle stops is that correct or what can u give a lil directions
 
  #14  
Old 10-20-2007, 07:33 PM
eddieo51's Avatar
Trailblazer
Join Date: Oct 2007
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Default banshee problems

[img]i/expressions/face-icon-small-smile.gif[/img]Yep, just pull both plugs,its easyier to kick over,check one cyn,and then the other,really the first good kick should tell you what the pressure is,,,, but you can kick it a-few times to be sure that the gauge is OK. It fires every stroke so it ANIT going to build up pressure to run on. Luck Latter Eddie.
 
  #15  
Old 10-20-2007, 08:48 PM
eddieo51's Avatar
Trailblazer
Join Date: Oct 2007
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Default banshee problems

[img]i/expressions/face-icon-small-happy.gif[/img]Also T when you do the Compression hold the thottle wide open, i forgot to tell you that. Latter. Eddie.
 
  #16  
Old 10-20-2007, 09:40 PM
T-daddy's Avatar
Trailblazer
Thread Starter
Join Date: Jul 2007
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Default banshee problems

jus bought the actron compression test from autozone 27 bucks. iight jus hold thumb throttle all way threw and kick till gage needle stop movin
 
  #17  
Old 10-20-2007, 09:54 PM
eddieo51's Avatar
Trailblazer
Join Date: Oct 2007
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Default banshee problems

[img]i/expressions/face-icon-small-happy.gif[/img]That should get-r-dun, what kind of reading is coming up to???? Eddie.
 
  #18  
Old 10-20-2007, 10:04 PM
T-daddy's Avatar
Trailblazer
Thread Starter
Join Date: Jul 2007
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Default banshee problems

gotta do it in the morning it aint enough light in my garage so ill get back to u first thing in the morning
 
  #19  
Old 10-21-2007, 01:44 AM
kawiking's Avatar
Pro Rider
Join Date: Jun 2005
Posts: 978
Likes: 0
Received 0 Likes on 0 Posts
Default banshee problems

never tried pulling both at the same time....... but yes kick it till the needle stops and hold throttle open.
 
  #20  
Old 10-21-2007, 02:31 AM
T-daddy's Avatar
Trailblazer
Thread Starter
Join Date: Jul 2007
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Default banshee problems

wow wat u mean allright so u take the plug caps off screw one plug out and leave the other in then u hook up the compresser hold throttle open and kick it till needle stop and do the same to other side is that correct
 


Quick Reply: banshee problems



All times are GMT -5. The time now is 12:15 PM.