Fixen to rebuild my motor, sleeve/piston, want to know pros and cons to both ways and which is gunna make more power. Gunna run the same bore(.40).

 

I would have to say Vito's is better for more power. They have a cutout that acts as though the engine is ported and changes the port timing. My buddy was just at the local quad shop talking to the owner about how to make his Blaster faster. He recommends the Toomey pipe, Vito's piston, of course the filter & jet kit, shaved head & ported cylinder, timing degree key, reeds and reed spacer, and if you want to go all out get the stroked crank.

 

on another site they claim the vitos piston sucks and the sleeve is soft, think im gunna run the f7 pipe, vitos stator thats will advance 11 degree, allready have shaved head, and guna do port work again when i resleeve it, stroker crank will be cuminsoon just dont know when, not soon enough, later on im gonna big bore it.

 

I don't know from experience, I'm just saying what I've been told. Vitos is mighty popular to suck so bad. What is a f7 pipe? Never heard of them.

 

http://www.factory7atv.com/PBexhaust.htm ,that was my opinion on vitos, was thinkin about going with there sleeve and piston but dont want sumthin that wont last.

 

That's a wild looking Blaster. Their silencers look kind of cheap, almost like they are home-made, but they might be OK.

 

they swear tothem on project blaster

 

<div class="FTQUOTE"><begin quote>Originally posted by: dsmikesneighbor

they swear tothem on project blaster</end quote></div>

Well, I guess they do. You don't think they would put their own product down do you? I think I would go with the Toomey B1 - it's tried an true by MANY.

 

vitos suck never buy . wiseco is the way to go its all i will ever use in my shee or anything

 

VITO's is great just make sure you mix your gas about 32:1