I will be putting a HMF slip-on on my 2003 Warrior as soon as it arrives and have been given the jetting requirements from HMF. They said install the 152 main that comes with it, run the clip in the 3rd position (which is stock I believe), and take the snorkel off of the airbox (running a K&N). The question I have is, what am I to do with the breather hose that comes from the motor that connects into the snorkel? I don't like the fact of it just hanging out in the open. Wondering what others have done regarding this issue. Any help will be greatly appreciated.

 

Back when I had a 660 raptor I found a small breather filter at A&A auto parts and put that in the hose

 

<div class="FTQUOTE"><begin quote>Originally posted by: viper5

Back when I had a 660 raptor I found a small breather filter at A&A auto parts and put that in the hose</end quote></div>


Thats what I did with my old warrior as well. I used the elbow that was on it and ran it into the airbox and put the filter in the airbox.

Here is a pic

 

Thanks for the info guys. I think I found the correct K&N for this breather.