Custom Front Bash/Skid Plate - Grizzly 450
#1
05-21-2008, 09:35 AM
Join Date: Jun 2005
Location: Southern NH
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
Custom Front Bash/Skid Plate - Grizzly 450
Well
After a month - I finally got my skid plate from the shop.
Before - stock plastic... as you can see it is beat down!
After - 1/4" Thick 5052 Aluminum!!! Woo Hoo!! no bolts to drag either!!
I mounted the front to the Winch plate and the rear is same place as plastic skid.
Just another shot from the bottom - Sweet huh?
After a month - I finally got my skid plate from the shop.
Before - stock plastic... as you can see it is beat down!
After - 1/4" Thick 5052 Aluminum!!! Woo Hoo!! no bolts to drag either!!
I mounted the front to the Winch plate and the rear is same place as plastic skid.
Just another shot from the bottom - Sweet huh?
#2
05-22-2008, 01:03 AM
Pro Rider
Join Date: Mar 2007
Location: Hialeah,Fl
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
#3
05-22-2008, 01:56 AM
#4
05-22-2008, 02:46 AM
#5
05-22-2008, 09:46 AM
Join Date: Jun 2005
Location: Southern NH
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
Custom Front Bash/Skid Plate - Grizzly 450
<div class="FTQUOTE"><begin quote>Originally posted by: 2FAST4URASS
GREAT JOB looks SWEAT supper HEAVY duty... </end quote></div>
Yea, it is Super Heavy duty! [img]i/expressions/face-icon-small-happy.gif[/img] But the Yamaha Alumimun skids are only 1/8" thick and are getting quite beat down... Those are getting replaced with 1/4" once they wear through...
<div class="FTQUOTE"><begin quote>Originally posted by: HeftyLefty
Hope no mud collects in there.</end quote></div>
No more mud than the stock plastic skid...
GREAT JOB looks SWEAT supper HEAVY duty... </end quote></div>
Yea, it is Super Heavy duty! [img]i/expressions/face-icon-small-happy.gif[/img] But the Yamaha Alumimun skids are only 1/8" thick and are getting quite beat down... Those are getting replaced with 1/4" once they wear through...
<div class="FTQUOTE"><begin quote>Originally posted by: HeftyLefty
Hope no mud collects in there.</end quote></div>
No more mud than the stock plastic skid...
#7
05-22-2008, 12:10 PM
Pro Rider
Join Date: Sep 2007
Location: St. Andrews, MB
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Custom Front Bash/Skid Plate - Grizzly 450
Very nice and heavy duty without being overly heavy.
If you really wanted to get fancy you could of water jet or laser cut the Yamaha logo in the front. My brother in law did something like that for his Honda.
But then he worked at a place that had the equipment for that so it didn't cost him anything.
If you really wanted to get fancy you could of water jet or laser cut the Yamaha logo in the front. My brother in law did something like that for his Honda.
But then he worked at a place that had the equipment for that so it didn't cost him anything.
Thread
Thread Starter
Forum
Replies
Last Post
RticKwad
Classifieds, Garage Sale & Swap Shop
0
07-21-2015 03:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)