Yamaha Discussions about Yamaha ATVs.

help on carburator tuning on a shee???

Old Oct 9, 2008 | 01:06 PM
  #1  
knear06's Avatar
Thread Starter
|
Weekend Warrior
Joined: Sep 2008
Posts: 19
Likes: 0
Default help on carburator tuning on a shee???

me and a friend of mine rebuilt a 99 banshee and got running and sycronized the carbs thru the shotglass and fixed the idle problem but now when you rev it up smoke comes out more on one side exaust than the other so what do we do??? should we up the jets on the carbs?? also it has the stock carbs on it and we bored it .60 over so should we go with 34 mm carbs or can we stick with the stock carbs?
 
Reply
Old Oct 10, 2008 | 12:41 PM
  #2  
Bobbyg's Avatar
Weekend Warrior
Joined: Jun 2008
Posts: 5
Likes: 0
Default help on carburator tuning on a shee???

Hey is it the left or right side ? IF ITS THE LEFT SIDE it may be your crank seal ,if its the right side only then your mix may be off , if you just want to tune/sync your carbs i use this http://www.bansheestuff.com/ca...linder-motorcycl2.html
 
Reply
Old Oct 11, 2008 | 02:23 AM
  #3  
knear06's Avatar
Thread Starter
|
Weekend Warrior
Joined: Sep 2008
Posts: 19
Likes: 0
Default help on carburator tuning on a shee???

it's on the left side thats not putting out as much smoke then the other side but on a warrior i owned you could crank up the fuel on the side of the carb just a little bit but i can't find nothing like on these i found out how to control the idle. and another question are banshee's known to put out not that much but a decent amount of smoke???
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Johnny Mac
Honda
5
Aug 15, 2019 03:13 PM
freeman34
General Chat
2
Jan 8, 2016 11:46 AM
CosmoM
Yamaha
0
Sep 21, 2015 04:57 PM
Alex G.
Other ATV Topics
2
Sep 16, 2015 12:13 PM
Elkaholic
Land, Trail and Environmental Issues
1
Sep 6, 2015 02:44 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:36 PM.