Blaster Top End Rebuild?
#1
Blaster Top End Rebuild?
I just bought my first Blaster. I always liked how small, light and cheap they were. I am an automotive mechanic so I know my way around.
This Blaster needs a little work but I did not have enough to buy mint condition. My question is about a rebuild. I did a compression check on it and I got 90PSI. At 90 PSI the guage held steady and did not leak. The quad runs decent. From what I read on here its suppose to be 130-140PSI?
At 90PSI can you get away with just a re-ring or do you think I would need to rebore?
This Blaster needs a little work but I did not have enough to buy mint condition. My question is about a rebuild. I did a compression check on it and I got 90PSI. At 90 PSI the guage held steady and did not leak. The quad runs decent. From what I read on here its suppose to be 130-140PSI?
At 90PSI can you get away with just a re-ring or do you think I would need to rebore?
#2
#3
#4
Thread
Thread Starter
Forum
Replies
Last Post
Quadzilla Heritage
Classifieds, Garage Sale & Swap Shop
0
09-25-2015 01:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)