I have a 1998 Wolvy 350 and I just replaced the carb. When I first fired it up it rev'd way hi. So i shut it down and checked the adjustment at the carb which I was out of, so I adjusted it at the throtle. I finally got it to come down to a descent idle but as soon as I touch the throtle she revs hi and won't come back down.
I am not sure if there is something I am missing but any help would be appreicated.

 

Never mind guys, after I post my question I pulled the side cover of the carb off and seen that the cable wasn't seated properly. Gotta slow down a bit. Thanks for checking anyway.