how many turns from dead tight is the stock setup. i think its 3 half turns but not sure... i ask because as i hold the throttle open and stick my finger threw to the intake side were the reeds are the carb walls and reed cage is drenched in fuel....ive been messing with this bike since 2:00 today and im about to start beting on it intead of fixing it...im know a good bit about carbs, 2 strokes and engine mechanics in general, but man its like this bike was put on this world just to **** me off...ha joking

but seriosly could use a lil help on this one

ima go drink a beer and get ready for this beutifull weather were about to get

respectfully-help a man out sugestions welcome

thanks

 

come on i know some one has to know this

 

Idle screw shouldn't have anything to do with a wet intake throat.... I seem to remember the setting for the adjustment on the carb is 3 or 3.5 turns.... not 3 half turns.... But I don't have my book handy, and won't til monday at work... It's in the bottom of my tool box..... If this thread's still alive and no answer monday, I'll try and remember to bring it home for info.

 

i appreciate it...but i think you are correct 2.5 to 3.5 turns, ive took the carb completly off and im giving it the full flush tomorrow morning before the game comes on off course...go dallas...im in my shed now poundin some brews and freezin my ballz off,there's about 2 foot of snow on the ground and its cold as hell...come on blaster run damnit


give me somthing to punch lol