Guys I need someone to measure the length of a Raptor 700

from the front end of the wheel to the rear end of the wheel:



I need precise measurement because I found a pickup truck for sale and not sure if a raptor will fit.

it's a Chevrolet Silverado Extended 2007

been trying to find pics/specs of it on google, i'm not getting the same model I found, it looks kinda smaller, not sure.

 

If the truck has a 6'6" (6 1/2') bed you should be fine. If it's the 5 1/2' you will need to leave the tailgate down. I have an 08 with the 6 1/2' bed and I have hauled several different fourwheelers in it.

 

I think you will be just fine with either bed tho if it is the short one you might need to keep the tailgate down to make it fit.

 

thing is I didn't have a measuring tape at the time, I only found a rope about the same length of the bed, although it was a little shorter, about 3 - 4 CM

I took that rope with me at home, and measured it, it was 172 CM.

so I'm guessing the bed's length is about 175 CM? in a extended silverado?

I would go back measuring the truck, but thing is it's VERY far from my house at the moment lol

 

Mine fits in the back f my extended cab chevy with the 6.5 bed, thats with mt +6 swingarm on.

 

I still need the measurement of the raptor guys.

 

You will have to measure the actual atv your putting in the bed to get a precise meausurement. Tire size, wear, and make of the tire will all make a difference on it fitting in the bed and the tailgate closing. I run 18's on mine most of the time, some guys run 22's. That is going to add 2 inches to the backside of the tire, (fronts don't matter because they won't stick out past the front bumper). 175cm converted to ft is 5 3/4 ft. It will fit in the bed but you may need to leave the tailgate down but it will be close.

 

thanks for the info, geoman.

and everyone else.