Yamaha Discussions about Yamaha ATVs.

New Big Bear 4x4 engine noise

Thread Tools
 
Search this Thread
 
  #1  
Old 03-08-2001, 05:32 PM
01Bear's Avatar
Weekend Warrior
Thread Starter
Join Date: Mar 2001
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

After much reading, studying, and some test driving, I decided to buy a new 2001 Big Bear 4x4 a few days ago. I have put a couple of hours on it through some moderately challenging terrain (mountain trails, rocky areas, and lots of Alabama clay/mud holes that I used to get stuck in with my 2wd machines), but I am trying to take it easy to break in the engine. I am very happy with the power, traction, and suspension on this machine. However, after riding awhile, when the engine gets warmed up good (the oil cooler fan cycling on and off), I hear a pretty prominent ticking noise while going down inclines, decelarating, and sometimes at cruising speed on flat land. Doesn't seem to do it when getting into the throttle. Of course, I have contacted the dealer, who is happy to check it out, but they did preclude by saying the Yamaha's do have a bit more valve/ticking noises and the hotter they get the louder it will be. I just wanted to find out if you other Big Bear/ Yamaha owners have found this to be true or if I should pursue it further if the dealer "doesn't find anything wrong with it".
 
  #2  
Old 03-08-2001, 07:53 PM
jdm's Avatar
jdm
jdm is offline
Trailblazer
Join Date: Oct 2000
Posts: 58
Likes: 0
Received 0 Likes on 0 Posts
Default

My 00 Big Bear does the same thing. My dealer told me when I bought it to expect that. He said that was normal for the B.B. 400. I wouldn't worry about it.
 
  #3  
Old 03-09-2001, 11:21 AM
Kman's Avatar
Trailblazer
Join Date: Dec 2000
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
Default

Yep, some valve ticking is normal, and it will be worse when the engine is hot. But you might want to get it checked out if your dealer is nearby, just to be sure. They may need to be adjusted.
 
  #4  
Old 03-10-2001, 05:53 PM
kodiakkid's Avatar
Trailblazer
Join Date: Jan 2001
Posts: 61
Likes: 0
Received 0 Likes on 0 Posts
Default

I agree!! Get the valves adjusted and it should quit down. But there will always be some clatter with the yamaha's setup, my kodiak does the same thing.
 
  #5  
Old 03-10-2001, 08:41 PM
BeRotten's Avatar
Weekend Warrior
Join Date: Mar 2000
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

...yep, all true. Make sure to have the valves adjusted at the 20 first service mark. My '00 BB
rattled pretty bad, enough to concern me. My dealer said it's all normal and not to worry about it until the first service when the valves are adjusted. After the adjustment they quieted down quite a bit. No worries...
 
  #6  
Old 03-15-2021, 02:04 AM
Levi O'Connor's Avatar
Weekend Warrior
Join Date: Mar 2021
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Yes mine has the same ticking noise

I have a 2004 yamaha big bear 400 4x4. I got it a couple years ago like new, it had the same ticking noise and I took it to the dealer ship and they said it was the valves. They readjusted them and the noise went away for a few months then it came back. I've been riding it four about a year now with the ticking noise and it runs like it did when it was new. The dealer ship said that it was a common problem with the valves.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dstrox4x4
Yamaha
1
10-06-2002 09:24 PM
02bigbear4x400
Yamaha
9
08-18-2002 03:42 PM
swicegk
Yamaha
8
02-02-2002 06:42 PM
350BigBear
Yamaha
2
07-11-2000 10:18 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: New Big Bear 4x4 engine noise



All times are GMT -5. The time now is 01:12 PM.