04' 660 Grizzly maintenance.
#1
Hi, Roger here, in Sac area. I have a 660 griz that has 135 hr's, and 1060 miles on it. I need's mojor service.
I checked the valves, and set them at .006 intake, .008 exhaust.
New oil and filter's.
I can't find the repair manual, or owner guide
Can someone please give me a list of important maintenance item's to do now, with that mileage and use, b4 I put it back together.
I've only ever done the valves and oil, so it need's alot i'm sure.
I have a klr650, and every 2k miles, you have to adjust the balancer shaft chain tension. Does the griz have that, or something similar. It runs fine, and I put in a new plug after 8 yr's. So any info I can get from you guy's will be much appreciated. 916-600-1601 if anyone is local. Thank's
Rog out.
I checked the valves, and set them at .006 intake, .008 exhaust.
New oil and filter's.
I can't find the repair manual, or owner guide
Can someone please give me a list of important maintenance item's to do now, with that mileage and use, b4 I put it back together.
I've only ever done the valves and oil, so it need's alot i'm sure.
I have a klr650, and every 2k miles, you have to adjust the balancer shaft chain tension. Does the griz have that, or something similar. It runs fine, and I put in a new plug after 8 yr's. So any info I can get from you guy's will be much appreciated. 916-600-1601 if anyone is local. Thank's
Rog out.
#2
With 135 hr and 1000 miles it should need nothing. What happen to it? My fiends 10 Year old 2003, 660 Grizzly with 3500 miles and 350 hrs only had one front wheel bearing changed and a battery since new, It even still has the original belt and spark plug. Motor and carb has never been touched. All he did was oil changes.
They have no grease fittings so all I can think of change the front and rear diff fluids and clean the air filter.
They have no grease fittings so all I can think of change the front and rear diff fluids and clean the air filter.
Thread
Thread Starter
Forum
Replies
Last Post
TLC
Utility ATVs
2
Sep 16, 2015 01:41 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




