Warrior Valve Adjustment Question
#1
#3
#5
To be exact they are: intake 0.06-0.07mm or 0.0023-0.0039inch.
Exhaust 0.16-0.20mm or 0.0063-00.0078inch.
They need to measure between these specs- min to max.
My guage didnt read that far out, I just adjusted the valves so my 006 would clear easy and my 008 inch guage was to tight. Hope this helps you
Exhaust 0.16-0.20mm or 0.0063-00.0078inch.
They need to measure between these specs- min to max.
My guage didnt read that far out, I just adjusted the valves so my 006 would clear easy and my 008 inch guage was to tight. Hope this helps you
#6
#7
I would re-adjust them. If they tick, clearance is off. I set mine at .005 for intake and .003 for exhaust when I had the stock cam. I didn't have anything smaller han a .005 so for the exhaust I set to a really tight .005. It ran great, no ticking and no problems. If he has an aftermarket cam, they should both be .004 clearance. I hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)