Hey guys, I'm having trouble with my 2000 warrior, i know the sylnoid is out, but I touch the two metal pieces to gether trying to start it, and it wont start battery is good and everything, what's wrong? sorry its so cauge, but I will give more info when asked.

 

Check the fuse on the rear end left side. If it's blown you wont be able to start the quad. There is a spare fuse located right next to it.

 

you are talking about those little white boxes right?

 

No, those are relays. There is a wire with a rubber section in the middle, it is located near those relays. This section is directly above your spare fuse. Pull the connection apart and the fuse is inside, if this is blown your quad will NOT run. It will take about 5 seconds to see if this is the trouble and wont cost a dime.

 

When you blew the silinod you may have shorted out something. does it turn over or do anything when you connect the 2 leads?