Ready for Upgrades
#1
I bought my first quad (Raptor 2001) about 7 months ago and ride at the coastal dunes in Florence Oregon. I'm tired of being dusted by the banchee's! My bike is all stock at the moment. What is the best place to begin for more power? I've seen a few threads recommending the DynoJet kit, K&N filter, and White Bros. E Series. Is this a good start? If so, any recommendations for good buys on the web? Thanks for the advice.
#3
get the GYT-R tip and header pipe, supposedot be massive torque, a definate plus for the dunes, and get a prodesign intake w/ k&N fiulter w/ outerwear, it is said that if you dont use a outerwear in teh dues the sand gets through a K&N no problem, then get a dynojet kit.
#4
your very first perf upgrade should be the air box. get a pro-design kn filter
set up, next cut the flaps out of the snorkle and put some uni-air box vents in lid
then re-jet go up in your mains i have 150-155 mains and up one size in pilot
jet to 25. that air box will be your biggest gain in performance!!! next get a
new silencer like the yoshimura or gyt-r.
01 blu 660r
GYT-R FRONT BUMPER
GYT-R SIDE FRAME COVERS
GYT-R SHOCK COVERS
GYT-R WATER PUMP/OIL FILTER COVER
GYT-R RADIATOR GRILL
GYT-R STARTER COVER
GYT-R A ARM SKIDS
GYT-R HOUR/TACH
PRM ENGINE SKID .190
PRM BAJA GRAB BAR
PRO-DESIGN KN
DURA BLUE AXLE
PRO-TECT STAINLESS SWINGARM SKID
WILDSKINZ HEADLIGHT COVERS
RENTHAL BARS
ALLOY SPECIALTIES BILLET BAR CLAMP
JET HOT HEAD PIPE & HEAT SHIELDS
SKAT TRAK EDGE PADDLE ITP RIMS
set up, next cut the flaps out of the snorkle and put some uni-air box vents in lid
then re-jet go up in your mains i have 150-155 mains and up one size in pilot
jet to 25. that air box will be your biggest gain in performance!!! next get a
new silencer like the yoshimura or gyt-r.
01 blu 660r
GYT-R FRONT BUMPER
GYT-R SIDE FRAME COVERS
GYT-R SHOCK COVERS
GYT-R WATER PUMP/OIL FILTER COVER
GYT-R RADIATOR GRILL
GYT-R STARTER COVER
GYT-R A ARM SKIDS
GYT-R HOUR/TACH
PRM ENGINE SKID .190
PRM BAJA GRAB BAR
PRO-DESIGN KN
DURA BLUE AXLE
PRO-TECT STAINLESS SWINGARM SKID
WILDSKINZ HEADLIGHT COVERS
RENTHAL BARS
ALLOY SPECIALTIES BILLET BAR CLAMP
JET HOT HEAD PIPE & HEAT SHIELDS
SKAT TRAK EDGE PADDLE ITP RIMS
#5
Ignore the posts about pipe suggestions. You're riding at the Oregon Dunes, so are restricted to a 93dB noise limit. All the standard exhaust systems for a Raptor exceed this limit (See Dirt Wheels Exhaust Shootout). I've been looking for a suitable exhaust myself, but have not really seen anything I like. Saw an FMF quiet core that may work, but didn't like the sound of it.
BTW, anyone who ignores this 93dB limit and takes thier chances - is someone who is not welcome, as the noise provides ammo for local residents to shut us down. And yes! There are those who are trying to shut us down!
BTW, anyone who ignores this 93dB limit and takes thier chances - is someone who is not welcome, as the noise provides ammo for local residents to shut us down. And yes! There are those who are trying to shut us down!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



