Warrior is missing, need help
#1
My warrior started missing the 2nd day at Siver Lake. The first day it was scream'n, then all of sudden the second day it had a bad miss/sputter. But only at full throttle. At 3/4 throttle it was fine but at full throttle it would keep cut'n out. I didnt run through any water and we took the carb and gas tank apart and cleaned everything and it still did the same thing. It also has a new plug. Need help. Any sugestions would be great.
#2
Run a wire from your negative terminal on the battery to the reverse lever mechanism. Do a search on that, its pretty common
Another thing to check if its a newer model is that the parking brake limiter isnt activating.. when it happens try and reach up near the clutch and push the parking brake mechanism on the clutch lever back in or forward.. sometimes if the parking brake cable isnt adjusted or is loose or missing the piece on the clutch lever wont stay against the safety switch which is the wire that goes up the handlebars to the clutch perch
Another thing to check if its a newer model is that the parking brake limiter isnt activating.. when it happens try and reach up near the clutch and push the parking brake mechanism on the clutch lever back in or forward.. sometimes if the parking brake cable isnt adjusted or is loose or missing the piece on the clutch lever wont stay against the safety switch which is the wire that goes up the handlebars to the clutch perch
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



