Yamaha Discussions about Yamaha ATVs.

Warrior wont crank

Old Jul 4, 2002 | 04:54 PM
  #1  
ohhman's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2001
Posts: 16
Likes: 0
Default

Hi all!! My friend has a '94 Warrior thats been sitting for a couple of years. We changed the gas and put a freshly charged battery in it before we tried to start it. When I push the starter button nothing happens nor do the neutral or reverse lights come on. However, the head lights work. Whats up?? The battery IS properly connected, could there be a bad fuse or something? Where is the fuse holder located?? Thanks for any help!!
 
Reply
Old Jul 5, 2002 | 12:43 AM
  #2  
ohhman's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2001
Posts: 16
Likes: 0
Default

Any body???
 
Reply
Old Jul 5, 2002 | 01:08 AM
  #3  
blazenwarrior's Avatar
Trailblazer
Joined: Jun 2002
Posts: 47
Likes: 0
Default

i am new at this but yea it could be a fuse. look for it under the rear left fender. it might have blown after putting new battery in, our after trying to maybe charge the old battery.i hope this helps.
 
Reply
Old Aug 22, 2002 | 11:28 PM
  #4  
turbomitch's Avatar
Weekend Warrior
Joined: Aug 2002
Posts: 4
Likes: 0
Default

You should also check to see if you ground to the frame and engine are good. The Warrior starter is only grounded by being bolted to the engine, if the ground to the engine is not solid it will not crank. You can ry connecting a jumper cable from the battery directly to the starter post. If it carnks your starter rely is bad.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jackg17
Ask the Editor
7
Jul 16, 2018 04:01 AM
Scooter's Shop
Polaris
9
Oct 9, 2015 02:09 PM
Barnsnelbon
Yamaha
1
Sep 27, 2015 03:07 AM
Jackg17
General Chat
0
Sep 26, 2015 09:30 PM
Bernhard
Yamaha
1
Sep 25, 2015 12:45 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:22 PM.