Warrior cutting out...tried all the usual things!
#11
Warrior cutting out...tried all the usual things!
try the stabil i think is whats ist called or go get some desiel fuel anti gel and put just a lil bit in and let it idle for a long time...[img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-wink.gif[/img][img]i/expressions/face-icon-small-sad.gif[/img][img]i/expressions/face-icon-small-blush.gif[/img][img]i/expressions/face-icon-small-disgusted.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img][img]i/expressions/face-icon-small-mad.gif[/img][img]i/expressions/face-icon-small-shocked.gif[/img]
#12
#13
Warrior cutting out...tried all the usual things!
No, it's a 95 Warrior I got for a $1000 because of this very problem. I was hoping it was the parking brake switch, but now I guess it's something else. I have no idea on it's history (how old the gas is, how long it sat, etc). I will get some fresh gas and Stabil tomorrow and see what that does.
I was in the float bowl and checked everything. The needle and main jet were ok.
I'll keep y'all posted, thanks! (and keep any more ideas coming!)
Colby
I was in the float bowl and checked everything. The needle and main jet were ok.
I'll keep y'all posted, thanks! (and keep any more ideas coming!)
Colby
#14
#15
Warrior cutting out...tried all the usual things!
get some of that carb/fuel injector cleaner u use in a car... mix it in the can when u get fresh gas... drain all the old gas out... even reserve... and it should help if its the carb.... did u try the reverse switch somethin about that there is a ground or sumtin u do.. i think there was someitn about that...
#17
Warrior cutting out...tried all the usual things!
Ok, so I got new gas today, mixed in some stabilizer and injector/carb cleaner. Emptied out the old gas, ran the carb dry, and let it idle for about 10-15 min. Still cuts out. When it cuts out, it puffs gray smoke, which makes me think its running way rich, as if the ignition is cutting out. Could still be the rev limiter problem, however I did all I could to rule that out. What else in the ignition is prone to failure that would cause this? Any ideas?
Colby
Colby
#18
Warrior cutting out...tried all the usual things!
if i remeber right there is a problem that can occur in the reverse lever... i forget what you do but this causes cutting out... i would try to post a new topic with that as the heading or sumtin mayb unless someone reads this and knows what im talking about
#19
#20