I have been fuching with my blaster for 4 months now after it was rebuilt, and still no luck. A few days ago I was coming home, and it didnt want to run. It has been rich, and has 2 sizes down from stock jet. I went out to start it and it wouldnt start, so i pulled the plug. It was, as usual, as black as heck. I got a different plug, and put in on and now i dont have any spark. Now, i wonder if the coil is bad? And it has been running rich because the coil has been getting bad and missing out a little bit? Does this sound right? Any help?

 

Nobody know anything bout this?

 

I would put the standard jet back in immediately, Blasters love to tear up pistons when run lean. You are very likely correct that it is the coil.

Check all the electrical connections first. If it was rebuilt just before the problem started you may have disturbed a connector that was in bad shape or even lost a connection to a ground.

 

Has anyone had problems with their blaster coil, or similar probs?

 

come on

 

another hour in the shop, another hour down the drian. GOD DAMN this pisses me off