You need to put 4 oz per gallon of Yamalube. That's 32:1. There's 128 oz in a gallon. 128/32 = 4 oz.

 

sounds good to me. it soo much easier to get on here and ask a question versus the "brains" around here.

 

YOu dont have to run at 32;1. Many oils allow for 50:1 or even 100:1. Just an FYI.

RoostKing...

 

alright.........got the smoking under control. now it missing somewhat in 1st 2nd and 6th. it doesnt pull as hard as it should and it kind of sputters. 3-5 only gets better. 4th and 5th is probably at its best but when it tops out it starts sputtering like it is getting flooded or something.

 

change the plugs.

 

i kinda know that much.......that is the first thing to check. i think i know what it is and i am gonna try to fix it. i will let u know what it was if it worked.

 

if i put new rings on my pistons is it required or suggested to rehone them

 

if you are getting the rings done at a shop, they should inspect it and tell you if honing is recommended...if you are doing yourself, take cylinder in for inspection.