Fine tuning blaster jetting
Apr 14, 2003 | 11:30 PM
#1
Thread Starter
|
Weekend Warrior
Joined: Apr 2003
Posts: 2
Likes: 0
Fine tuning blaster jetting
Ok first post here so be gentle [img]i/expressions/face-icon-small-smile.gif[/img]
1997 Blaster .40 nacurma racing piston, FMF fatty pipe, 20" blackwaters and a 1/2 reed spacer
My current jetting is 300 main 35 pilot and my needle is 2nd from the top
The bike runs good but i want more low end (hill climbing) power. any advice?? Thanks in advance [img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img]
1997 Blaster .40 nacurma racing piston, FMF fatty pipe, 20" blackwaters and a 1/2 reed spacer
My current jetting is 300 main 35 pilot and my needle is 2nd from the top
The bike runs good but i want more low end (hill climbing) power. any advice?? Thanks in advance [img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img]
Thread
Thread Starter
Forum
Replies
Last Post
house1
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
3
Aug 9, 2015 10:49 PM
drewy2dope
Ask the Editor
11
Jul 31, 2015 09:36 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
