which idea do you think is better
#1
which idea do you think is better
I just ordered an exhaust system and a jet kit and am thinking about modding the airfilter when I put it on, but i wont be buying a proflow kit for a while. So this is what I am thinking,
1. I could just take the airbox lid off and then put two bolts through the top of the airfilter with locknuts too keep it in place.
2. Or I could take off the snorkle.
3. I could cut the lid off at the first clip so it still hold the filter on.
Also if I do any of these what do I do with the breather hose attached to the snorkle?
So give me your opinion on which idea would work better for me.
1. I could just take the airbox lid off and then put two bolts through the top of the airfilter with locknuts too keep it in place.
2. Or I could take off the snorkle.
3. I could cut the lid off at the first clip so it still hold the filter on.
Also if I do any of these what do I do with the breather hose attached to the snorkle?
So give me your opinion on which idea would work better for me.
#2
#4
#6
#7
Trending Topics
#8
which idea do you think is better
You can get a little filter for it from Autozone or other auto parts stores. Might need an adapter to connect it to the hose though. Or you can go to your dealer and order the K&N crank case breather filter they sell. Look at this picture on Albas website. The little red filter is what you want. If you get it from an auto parts store it will be similar looking but you'll need something to attach it to the hose like a piece of plastic tube.
Albas website
Albas website
Thread
Thread Starter
Forum
Replies
Last Post
fordfaithful21
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
12-07-2015 05:52 PM
Elkaholic
Land, Trail and Environmental Issues
1
09-06-2015 02:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)