piping the blaster
#1
#3
piping the blaster
Your best bet is the Toomey B-1 kit. it produces the best overall power increase over all the other pipes, plus comes with the pipe, Silencer, high Flow air filter, 310 main Jet and a cross-bar pad. www.rockymountainatv.com has it for 299.99 that is unbeatable for the performance and price[img]i/expressions/face-icon-small-smile.gif[/img]. and yes if you go a tooth up on the front sprocket, you will have a bit more top end speed, but you will lose a little low end tho. but after the pipe kit, both low end and top end are greatly increased, good luck.
#4
piping the blaster
if i put a jet kit on the blaster, do i have to replace the exhaust with something other than stock. can i just keep the stock exhaust and put a jet kit on it and have improved power. i'd like to just put a jet kit on it, how much power/performance more will that give me? will it be noticable and worth it. and i don't have to have any other fuels or anything for it do i? just put it on there and run it like i normally would?
help appreciated
blaster rida
help appreciated
blaster rida
#6
piping the blaster
Originally posted by: crispy
if i put a jet kit on the blaster, do i have to replace the exhaust with something other than stock. can i just keep the stock exhaust and put a jet kit on it and have improved power. i'd like to just put a jet kit on it, how much power/performance more will that give me? will it be noticable and worth it. and i don't have to have any other fuels or anything for it do i? just put it on there and run it like i normally would?
help appreciated
blaster rida
if i put a jet kit on the blaster, do i have to replace the exhaust with something other than stock. can i just keep the stock exhaust and put a jet kit on it and have improved power. i'd like to just put a jet kit on it, how much power/performance more will that give me? will it be noticable and worth it. and i don't have to have any other fuels or anything for it do i? just put it on there and run it like i normally would?
help appreciated
blaster rida
it consists of a high Flow Air filter, a complete Dyno-Jet kit and a filter care kit along with outerware's.
there around 99 to 130$ depending on what kit you get. the K&N kit is a good one. the filter/jetting combo will give you noticable power increase plus the engine will breathe better too.
Thread
Thread Starter
Forum
Replies
Last Post
mrtidy
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
02-03-2016 05:00 PM
greg86hd
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
09-16-2015 12:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)