You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the ATVConnection Forums community today!
250 caterra KMV quad 2007 cannot find a 7 pin cdi . so need to find a wiring diagram for cdi connections & test procedure.part #on CDI JT0704JP [4pin square male connector black,red,blue&green wires.And 3 wire female flat connector orange, black & black&white wires. What happened was a complete melt down of the wiring. I have a complete wiring harness, left handle bar control, ign swt,ign coil,stator coil.Only thing we could not get was cdi.Any where we could find a cdi for this Chinese Quad. And a test procedure for a cdi ."Help". Thanks!!
The remote/alarm, if it has or had one has about 7 different places to plug up stuff.
You know I hadn't thought of that ... But it doesn't add up after thinking about it. I've never seen a remote module on a 250cc machine (but I haven't seen a 7 wire CDI either!), plus I think this link shows a 7 wire CDI with colors that match as best I can tell with Harold51's post:
Hello Guys: Just a up date, Replaced the main wiring harness, left control swt, repaired ign swt. replaced burned out stator ,Made electrical checks of stator, shut down system,coil, trigger system all checked out Ok, Still points to a bad CDI . Have one coming from the Main land of China with frieght $60.00 I have a wiring diagram of the cdi which may help others in the future. Will let you Know when this Chinese Quad is running Thanks for the help Harodl51.
Hello Guys : Just a short note,7 Wire CDI arrived 03/01/11 from China. Changed over one 3 wire plug the other 4 wire was the same .Hit the start button, way she went.Another Chinese quad is running in British Columbia Canada again!! Thanks for the help!! harold51.
HI, i have just bought a Bashan BS300S-18 engine and after many hours work have fitted it to my quad chassis. I bought a new CDI for the engine that matches the description of the CDI in this post. Despite having a wiring diagram for the BS300S-18 quad, i'm having trouble working out which cable goes to where, i.e. the wiring diagrams wire colors don't match the actual colors on the CDI unit. Did you find a wiring diagram for the CDI and a safe way for testing it? Any help would be appreciated! i've already melted one CDI and don't want to wreck another!