yerf dog 90cc wiring
Apr 3, 2011 | 01:48 PM
#12
Thread Starter
|
Weekend Warrior
Joined: Mar 2011
Posts: 9
Likes: 0
You need to read further down the thread where we found out that that CDI will *not* work. That 5 pin CDI is a four stroke CDI and will not work on a 2 stroke. It starts up and idles, but will not rev up. You need to buy a 2 stroke CDI like the one in Jacob_royers's link.
The ignition timing is way different for a two stroke versus a 4 stroke.
BTW, the 2 connector 6 pin CDI you bought is the same internally as the 5 pin CDI above except for the connectors.
The ignition timing is way different for a two stroke versus a 4 stroke.
BTW, the 2 connector 6 pin CDI you bought is the same internally as the 5 pin CDI above except for the connectors.
just making sure before I spend more moneyabout to buy this one. someone please confirm that this is the correct one, and what is the pinout on it? wire colors do not match the wiring diagram
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT
Apr 4, 2011 | 12:23 AM
#14
Thread Starter
|
Weekend Warrior
Joined: Mar 2011
Posts: 9
Likes: 0
Apr 6, 2011 | 03:02 PM
#15
Trailblazer
Joined: Sep 2010
Posts: 83
Likes: 0
From: Southern Indiana
Sorry I haven't got a chance to get out and look at it been crazy busy! I know this for a fact.
Orange / coil
Black / ground
Red stripe wire / red stripe wire
Black stripe wire / black stripe wire
Black with white stripe is kill switch. Grounding that one kills ignition
Orange / coil
Black / ground
Red stripe wire / red stripe wire
Black stripe wire / black stripe wire
Black with white stripe is kill switch. Grounding that one kills ignition
Apr 7, 2011 | 03:10 PM
#16
Thread Starter
|
Weekend Warrior
Joined: Mar 2011
Posts: 9
Likes: 0
Thats no problem. I just got it today.
I have black, orange, red/black, black/white, and red/white
what do the red/white and red/black connect to? I have no wiring harness so i cant just connect them.
I have black, orange, red/black, black/white, and red/white
what do the red/white and red/black connect to? I have no wiring harness so i cant just connect them.
Apr 10, 2011 | 11:52 AM
#20
Trailblazer
Joined: Sep 2010
Posts: 83
Likes: 0
From: Southern Indiana
The Orange wire goes to your coil the black is ground. The striped wires goto hthe same colored stripe wires on you're stator and black with white stripe is kill switch . There are 2 wires going to coil the black one is ground.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)