Hensim 150 CC not shifting right.
#21
#22
Join Date: Dec 2008
Location: Tracy, California, USA
Posts: 3,260
Likes: 0
Received 12 Likes
on
12 Posts
The first thing I would do is look for loose or slipping mechanical connections in the FNR lever/cable chain. Fix that if necessary, then look at adjustment.
On my Hensim quad I ran into trouble when climbing hills in Forward (drive). Under load the FNR gearbox would pop out of gear completely, then re-engage shortly after (with a little grinding in the process). I also noticed a sort of galloping effect when the load wasn't enough to pop it out of gear. It almost seemed like the CVT transmission was gearing down and then back up under medium load.
I fixed it by adjusting the range of the lever arm on the transmission to be be *more* into the Forward position when the Drive selector was in Forward, and *less* into the Reverse position when the Drive selector was in reverse. That was three years ago - It's been fine ever since.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)