I have a copy of a E-Ton Yukon YXL/CXL service manual. Let me know if you want a copy. I will scan it at your request.

 

sure. sign me up. PM me the details. we'll chit-chat.

 

I'm on the road one more week. When I get back, I will scan the manual and send you a copy.

 

Hello, I am working on a eton my son accquired from a friend. He is 10 and very excited about getting it, but it don't run. carb or wiring problem. Could we have a copy of your manual?
thank you for your time.

 

what is it doing or not doing?
examples: cranks but doesn't start, no spark, spark plug is dry, no fuel in float bowl, runs but bogs down when pushing throttle, etc.....
what size quad? 150cc? 110cc? 90cc? 250cc? automatic transmission, 3 speed transmission, fully manual transmission?
if you list what you know the quad's deficiencies are, we can help you fix it. plus, the manual will help out too!

 

I will start scanning the manual this week. Let me know if there is a particular section you require. I can fwd that section to you.

 

I will start scanning the manual this week. Let me know if there is a particular section you require. I can fwd that section to you.

 

Which model E-ton do you have? Here's a link to all the E-ton wiring diagrams.
http://www.anythingatv.com/Technical...g_Diagrams.htm

 

So, now I am trying to measure the output of my stator...anyone know what voltage, ohms, amps, AC or DC values for each wire should be on the four wire, six pole E-ton YXL stator? This is because I purchased a new aftermarket CDI for GY6 150 engines...but I'm now not getting any power to the coil from the CDI. Big surprise. I'm now learning some CDI's are for AC system and othewrs are for DC systems. I don't know which I need or how to tell what my systems is. I assume its a DC system but I'm not positive.

 

Project X is turning into Project $.