1) Engine problems.. If your quad wont run..post in here.

Chinese Quad not starting

Thread Tools
 
Search this Thread
 
Old Nov 14, 2022 | 12:59 PM
  #1  
DizzyWizard's Avatar
Thread Starter
|
Weekend Warrior
Joined: Nov 2022
Posts: 1
Likes: 0
Default Chinese Quad not starting

Hey everyone, I purchased this Chinese squad and hopes of fixing but I am currently stuck. Originally the old owner said that they had an issue holding a charge and the battery that came with it was dead so I bought a new battery. I also purchased a whole new wiring kit that included a new regulator, starter, relay and etc. I installed everything but all I'm getting is a clicking sound from the starter relay. I jumped the relay with the screwdriver and it still clicked. So I figured the starter would be bad and I replaced the starter. I still get the same issue even when I jump the relay. Any tips would be greatly appreciated along with if you guys know the possible style of this Chinese quad.

 
Reply
Old Nov 15, 2022 | 03:02 AM
  #2  
merryman's Avatar
Elite Pro Rider
10 Year Member
Liked
Joined: Oct 2013
Posts: 7,483
Likes: 387
From: Lancaster England
Default

Tyres are on backwards, swap LH wheels with RH ones. Make sure the earths from battery to frame, and to engine are good. It is not always as easy as people think to get good contact when you jump the solenoid, you were not jumping it properly if it clicked anyway, as jumping the thick wires bypasses it entirely. If you then do get the starter turning, swap the solenoid for the old one, as the new one must be a dud.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ssolis125
Chinese Quads
0
Jun 14, 2017 01:08 AM
Concept Til Creation
Chinese Quads
1
Sep 28, 2016 12:31 PM
Precisionwatercraftmotorcycle
Chinese Quads
4
May 22, 2015 08:49 AM
masterbs
Chinese Quads
1
Jun 18, 2006 10:25 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:43 AM.