Get this, my hi beams work but my low beams don't. Any help on where I can start would be great.
Thanks for the help

 

Three things it could be! Dimmer switch, broken or disconnected wire or both bulbs are burned out. If you have a test light, check at the connector near the headlight to see if there is power at both the high and the low beam circuit. If there is, then its just the bulbs. If not, go back to the dimmer switch and check for voltage there. Try it in both positions to make sure they both have power. If you do, then you will have to check the harness for breaks or loose connectors. If you dont have voltage coming out of the switch then the switch is probably bad.
I dont think they use a seperate fuse for each circuit but you should probably check fuse too just to be sure.
Trailboss450

 

I had same problem though I haven't fixed it yet. Can you let me know what the problem was with yours?
thanks

 

Well it was a blowen Fuse, Dont know how i blew it but with a new fuse it works great.
Thanks
[img]i/expressions/face-icon-small-happy.gif[/img]