Hey all,
I have a friend who is fixing up an old beater 3 wheeler. It needs a pull start cover and all the parts inside. Can anyone please point me in the direction of a parts dealer for these old things?
Thanks very much!
I'm a newbie too, so this is my first post. [img]i/expressions/face-icon-small-happy.gif[/img]

Mike

 

Denniskirk sells every thing he needs.

 

Is that someone here or are you refering to a website?
Have a url?

Thanks!

 

sorry I should have said. it is denniskirk.com they sell all kinds of parts for 3wheelers.

BTW Welcome to the site

 

Hey thanks!
I think I found it. It's like 65 bucks for everything.
I gota question though,

Do you know if it's the same for the 185 and 200? I have no clue what this thing is cause it's so old. The dude my friend bought it off of, says it's got a 200 motor in it, but I can't tell.

Are the pull covers and internals different?

Thanks again,
Mike

 

check bikebandit.com

they have the electronic microfische (sp?) for both bikes with part numbers- you can cross reference them there to see if they are the same. They also sell parts, but they are going to be higher than other dealers on the web, they carry lots of hard to find items. also- welcome to the boards- folks on here are really helpful

 

i be thinkin that 81-83 they was the same but not positive

 

the CC's are marked on the bottom of the cylinder right where it sits on the base.I think its on the rear side but it might be on the front and it wil probably read 197cc or 193cc this would be called a 200.

 

Thanks!
But I'm not going to pull the jug off just to see what it is.

That'd be like cutting a tree down just to see how old it was. [img]i/expressions/face-icon-small-happy.gif[/img]

 

no it's on the out side. you don't have to take it apart. just look at the jug on the backside under carb. [img]i/expressions/face-icon-small-wink.gif[/img]