'84 200x Swingarm Bolt Removal
#21
'84 200x Swingarm Bolt Removal
I can't believe all these bolts are froze this bad. My X sat in the weeds from the late 80s til 2003 and I had the bolt out in about 5 minutes.
Of course it was about 0 degrees out, maybe with the contraction due to the cold temp it made it easier for me. Or maybe all those years of lifting weights just payed off when I hit it with the hammer.[img]i/expressions/face-icon-small-happy.gif[/img]
Jeff
Of course it was about 0 degrees out, maybe with the contraction due to the cold temp it made it easier for me. Or maybe all those years of lifting weights just payed off when I hit it with the hammer.[img]i/expressions/face-icon-small-happy.gif[/img]
Jeff
#22
'84 200x Swingarm Bolt Removal
well i have tried everything now i am in a bad spot i pounded a 1/2 drive extension on the bolt and pounded the crap out of the extension didn't move at all so now i have the extension stuck on the threads of the bolt so trying to get it of i snap the threaded part of the bolt clean off so now i NEED it out so screw it i will just cut the bolt in between the frame and the swingarm on both sides but the sawzall won't cut the bolt i wore all the teeth down on the blade and am not even 1/4 thru the bolt and i still need to do the other side
PLEASE HELP!!!!
PLEASE HELP!!!!
Thread
Thread Starter
Forum
Replies
Last Post
GirlsCan2
Technical and How-To Articles
0
08-27-2015 02:58 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)