i'd like to know if someone can help me here,one of my back (tire rim seal) is always going flat,the rim is not in the best shape it could be but there is got to be a way that i can glue the f*cker to the rim right!!!!!!!

please help me

 

Yes there is away to glue it to the rim. I will have to call my tireman and ask he what he uses.

 

Put a tube in it, it will cost about $15 and no more trouble

 

Yup that would be the only thing you can do. I havent ever heard of gluing the tire down but Im sure the first time you REALLY got on it it would spin the wheel in the tire and break the bond anyway. That is one of the bad things about tubes also, if you do that you will end up ripping the valve stem off the tube but its better than glueing I suppose.

 

Or you can just do the logical thing and take it to an automotive tire shop and have them put bead sealer on the rim and be done.....[img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-wink.gif[/img]

 

spin,did that the valve riped out.

push,did that to,took it to two shops.

 

WHERE CAN I FIND THE BLACK PLASTIC AT FOR MY 03 DS 650

 

I sent you a PM BOMBAROD.[img]i/expressions/face-icon-small-smile.gif[/img]