Traxter won't shift out of reverse
#1
Traxter won't shift out of reverse
Traxter won't shift out of reverse or forward while the engine is running. Shifting lever works ok when the engine is off. It will go from park to reverse but after that I can't get it to move. If I start it in forward ( I don't know if it should do that) I can't move the shifter out of forward. Any idea what's going on here?
#2
#3
Traxter won't shift out of reverse
Hi runkeldc,
check the idle speed first. If it is too high the clutch will not seperate so you have problems shifting the Reverse/H/L gear. You may adjust idle speed at the left side underneath the carburator. I hope this will help.#
greetings from Germany
check the idle speed first. If it is too high the clutch will not seperate so you have problems shifting the Reverse/H/L gear. You may adjust idle speed at the left side underneath the carburator. I hope this will help.#
greetings from Germany
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)