How long does it take to get an HPR cam set?

 

Hey guys I have HR cams in my bike and i love the quick reving and they pull all the way up .Ifirst put them in when i was running stock piston it made a big difference now that i am running big bor 13to1 it is even better.

 

I have his custom ground cams for a Lard @$$ rider, trail/race, but mainly trail setup. Ask for it by my name [img]i/expressions/face-icon-small-happy.gif[/img]
They pull strong from the bottom all the way up.
Justin

 

Can I get some of those for drag use!!!!

[img]i/expressions/face-icon-small-smile.gif[/img]

 

Eric, can I get the lard@ssbigdsgrind on my 840[img]i/expressions/face-icon-small-wink.gif[/img] he he he Who luvs ya Mike!!!!!!!!![img]i/expressions/face-icon-small-happy.gif[/img]

 

Mine made low 60's rwhp with stock pipe/end cap, and stock air box and the engine mods(Eric's Trail Setup). Just this past weekend I took off the air box, and let this bad boy breathe, I am axious to get it jetted where it needs to be. I kept going up on the powerjet until I didnt have anybigger jets so I started drilling, and it kept gaining more and more power. I drilled up to the largest jet drill I had, and it was a .040, the plug looked way too lean.I finally yanked out the powerjet, and this dog will hunt now! I didnt have any idea how restricted this thing was. Now it rips. I just need to throw more fuel to it. I am going to make my own airbox out of alluminum I have laying around the garage,that way the filter will be protected, and it will still get some air. I like hitting the hill climbs up in the mtns of WV, sitting at a stop at the bottom and climbing to the top like there is no tommorrow, when everyone else hits w/a rolling start. I can't vouch for the 109s, or the 110's but the Mrhp-L.A.R. T/R but, M.T cams rock(for translation see my earlier post).
Justin

 

Eric ,I don't think everybody would be as confused as you think. There is a lot more people on the ball out there than you are giving credit too. If you don't want to give out cam spec just say so, but don't be telling people it too confusing.


I guess I have just been LUCKY ! Running my cam for the masses.

 

Here is a great link to help understand camshafts. The average person should be able to read this and comprehend all of HPR's cam profiles. http://www.holley.com/HiOctn/TechSer...IECCTech2.html

 

i run hpr3 cams and love them. full power all the way throught the rpm band. great cams.

 

[quote]
Originally posted by: THEBOM
Eric ,I don't think everybody would be as confused as you think. There is a lot more people on the ball out there than you are giving credit too. If you don't want to give out cam spec just say so, but don't be telling people it too confusing.





Mr Ross, He would be talking about guys like me[img]i/expressions/face-icon-small-happy.gif[/img] Just help me beat the guy in the next lane with your R&D and keep it under wraps if that helps[img]i/expressions/face-icon-small-wink.gif[/img] Looking forward to April for the shootout!!!!! The pressure is on guys[img]i/expressions/face-icon-small-shocked.gif[/img]