03 to 04 swingarm question.
#1
#2
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
What's up Shmee. Once again it was fun down in LS over Easter. But anyway, in answer to your question, The OD of the swingarm bushings are the same but the ID is not. When I put on my extended swingarm they sent along some bushings that must be for an '03 or earlier, cause the bolt hole was much too big (and there were no roller bearings). Luckily I was able to punch out the bushings (that also have roller bearings inside them) from my stock swingarm and use them. As far as the axial carrier goes it fit right into my new swingarm no problem. Hope this helps.
#4
#5
#6
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
ok thats what i wanted to know. they make some i was wondering if ti was like the ones he makes. but thanks by the way. maybe if i get down to overland park to a friend and his wife. i let you know so maybe i can take a look at it. THANKS[img]i/expressions/face-icon-small-smile.gif[/img]
#7
Trending Topics
#8