CAN-AM (BRP) Discussions about CAN-AM ATVs.

Install on the barnett 9 disk

Thread Tools
 
Search this Thread
 
  #1  
Old 07-21-2005 | 08:58 PM
650VIPER's Avatar
Thread Starter
|
Pro Rider
Joined: May 2004
Posts: 1,936
Likes: 2
Default Install on the barnett 9 disk

Boys I just got this barnett 9 disk setup, in the package they sent me nine plates each. If you use the odd plates at each end that leaves only eight holes to fill, were does the ninth steel go?
 
  #2  
Old 07-21-2005 | 09:22 PM
busmechanic's Avatar
Pro Rider
Joined: Oct 2003
Posts: 909
Likes: 0
Default Install on the barnett 9 disk

there is only one plate that fits in the offset grooves on the basket. it gos on last.
 
  #3  
Old 07-21-2005 | 09:28 PM
chiknhawk's Avatar
Pro Rider
Joined: Feb 2005
Posts: 242
Likes: 0
Default Install on the barnett 9 disk

First put one of the odd friction plates then a steel, friction, steel, friction, steel, etc. until you get to the second(the other odd friction) plate, then rotate it slightly to put it in the shorter notches. The odd plates are the ones that look greenish, and are different from the other friction plates. Remember to soak your clutch prior to installation beacause the plates will expand ( Very important.) readjust your cable. Pm me if you need any more help and iLL give you my nuber so we can talk over the phone. Chiknhawk
 
  #4  
Old 07-21-2005 | 09:28 PM
650VIPER's Avatar
Thread Starter
|
Pro Rider
Joined: May 2004
Posts: 1,936
Likes: 2
Default Install on the barnett 9 disk

all the friction plates in the barnett are the same, except the two green colored end plates. I think I have one extra steel?
 
  #5  
Old 07-21-2005 | 09:31 PM
chiknhawk's Avatar
Pro Rider
Joined: Feb 2005
Posts: 242
Likes: 0
Default Install on the barnett 9 disk

 
  #6  
Old 07-21-2005 | 09:35 PM
650VIPER's Avatar
Thread Starter
|
Pro Rider
Joined: May 2004
Posts: 1,936
Likes: 2
Default Install on the barnett 9 disk

chiknhawk, you type faster than me lol. Thats what the instruction said also, it just didnt make any sence to me that they would send an extra steel. Thanks i'll just leave the other steel out.
 
  #7  
Old 07-21-2005 | 10:52 PM
chiknhawk's Avatar
Pro Rider
Joined: Feb 2005
Posts: 242
Likes: 0
Default Install on the barnett 9 disk

Hey dont leave anything out. the reason they send extra is so it grips and bites stronger. I just put mine in last week, I seriously would not leave anything out. Chiknhawk
 

Trending Topics

  #8  
Old 07-21-2005 | 10:55 PM
jackass650's Avatar
Pro Rider
Joined: Sep 2004
Posts: 733
Likes: 0
Default Install on the barnett 9 disk

hey john I sent you a pm last week about what we were talking about, I figured it out and asked if you had one yet but never heard back from you, do you still need it? I can mail it tomorrow if you do
 
  #9  
Old 07-21-2005 | 10:59 PM
chiknhawk's Avatar
Pro Rider
Joined: Feb 2005
Posts: 242
Likes: 0
Default Install on the barnett 9 disk

the first friction plate in is to be a greenish one and the last friction plate to go in is to be a greenish one. as you take yur old ones out stack them in the order they come out, reinstal your new ones i the same order only the first friction plate is to be a green one and the last friction plate is to be a green one. I f i can help pm me a number and Ill give you a call i have free long distance. Chiknhawk
 
  #10  
Old 07-21-2005 | 11:02 PM
chiknhawk's Avatar
Pro Rider
Joined: Feb 2005
Posts: 242
Likes: 0
Default Install on the barnett 9 disk

Hey i must not have gotten the pm. Yea what happened was i ran out of room on my pms because i never deleted any of them. I just found out last night that you are only allowed so many but now i can get pms. sorry man, but yea i neeed it pm me. THanks, John
 


Quick Reply: Install on the barnett 9 disk



All times are GMT -5. The time now is 04:02 PM.