Millenium Aluminum Sleeve Update
#151
11-07-2006, 09:37 AM
Millenium Aluminum Sleeve Update
Originally posted by: yjacket2001
DSNUT said
"Here is the really funny part. I never once called Millenium. I have never talked to anyone there. I have never spoken to Kurt. You did and you got the information that supported my suspicion."
Well, look at the 3 consecutive posts below and on same Thread. If this is how you represent your company, thanks for the heads up. People who hire hypsters need hyping.
================================================== =======================
DSNUT
Pro Rider
Monmouth, Oregon
Sun April 02, 2006 11:09 AM
ERBE,
Who was your contact at Millenium? I will try to call this week....
Ron
-------------------------
yjacket2001
Sun April 02, 2006 11:21 AM
I am not ERBE, but Kurt is hands on expert.
--------------------------------------------------------------------------------------
DSNUT
Thu April 06, 2006 12:41 AM
You guys might want to check with Millenium. I heard through the grapevine that ERBE's Aluminum sleeved cylinder was their first and last..........
Don't take my word for it, check it out before you get your heart set on one. I might be wrong, but I doubt it..................... [img]i/expressions/face-icon-small-wink.gif[/img]
================================================== =============================
DSNUT also said
"Now that everybody knows how this scenario really looks, lets all wait and see if it works! [img]i/expressions/face-icon-small-smile.gif[/img] "
Why wait? 700cc with truely customized piston lifetime guaranteed.
If you need initial big bore, TheBom or used Pami big bores since you know you can reline his big bores.
Maybe there is a specific design flaw that doesn't allow HPR big bores to be relined.
That alone would make TheBom the superior big bore purchase based on cost/benefit analysis: same peformance and less cost over time. That's what ERBE did and he's a casting expert.
Telling half truths in the hopes that people don't realize you are misrepresenting the overriding truths is much worse than out-right lieing: acting like you are truthful within a wall of 'secrets'.
Paid hypster/bashers bore me, and the companies they represent are always in Suspicion of hiding the truth under 'secrets' and half truths. Always.
DSNUT said
"Here is the really funny part. I never once called Millenium. I have never talked to anyone there. I have never spoken to Kurt. You did and you got the information that supported my suspicion."
Well, look at the 3 consecutive posts below and on same Thread. If this is how you represent your company, thanks for the heads up. People who hire hypsters need hyping.
================================================== =======================
DSNUT
Pro Rider
Monmouth, Oregon
Sun April 02, 2006 11:09 AM
ERBE,
Who was your contact at Millenium? I will try to call this week....
Ron
-------------------------
yjacket2001
Sun April 02, 2006 11:21 AM
I am not ERBE, but Kurt is hands on expert.
--------------------------------------------------------------------------------------
DSNUT
Thu April 06, 2006 12:41 AM
You guys might want to check with Millenium. I heard through the grapevine that ERBE's Aluminum sleeved cylinder was their first and last..........
Don't take my word for it, check it out before you get your heart set on one. I might be wrong, but I doubt it..................... [img]i/expressions/face-icon-small-wink.gif[/img]
================================================== =============================
DSNUT also said
"Now that everybody knows how this scenario really looks, lets all wait and see if it works! [img]i/expressions/face-icon-small-smile.gif[/img] "
Why wait? 700cc with truely customized piston lifetime guaranteed.
If you need initial big bore, TheBom or used Pami big bores since you know you can reline his big bores.
Maybe there is a specific design flaw that doesn't allow HPR big bores to be relined.
That alone would make TheBom the superior big bore purchase based on cost/benefit analysis: same peformance and less cost over time. That's what ERBE did and he's a casting expert.
Telling half truths in the hopes that people don't realize you are misrepresenting the overriding truths is much worse than out-right lieing: acting like you are truthful within a wall of 'secrets'.
Paid hypster/bashers bore me, and the companies they represent are always in Suspicion of hiding the truth under 'secrets' and half truths. Always.
#152
11-07-2006, 09:52 AM
Administrator¿
Resident Killer!
"A little nonsense now and then, is relished by the wisest men". Willy Wonka: 1971
Cigars! Earth ne'eer did breed such a jovial weed.
A Tiger Doesn't Lose Sleep Over Opinions of Sheep
Resident Killer!
"A little nonsense now and then, is relished by the wisest men". Willy Wonka: 1971
Cigars! Earth ne'eer did breed such a jovial weed.
A Tiger Doesn't Lose Sleep Over Opinions of Sheep
Join Date: Jan 2006
Location: Landrum, South Carolina, elevation 986'
Posts: 54,721
Received 5 Likes
on
5 Posts
#153
03-21-2008, 03:58 PM
#154
04-19-2008, 11:15 AM
Join Date: Nov 2005
Posts: 3,940
Likes: 0
Received 0 Likes
on
0 Posts
Millenium Aluminum Sleeve Update
ERBE posted on another forum that his build locked up on the dyno a day or two ago. We are still waiting to hear why. [img]i/expressions/face-icon-small-sad.gif[/img]
It lasted 16 months. Not bad at ALL for a sleeved jug! Good job ERBE! [img]i/expressions/face-icon-small-smile.gif[/img]
It lasted 16 months. Not bad at ALL for a sleeved jug! Good job ERBE! [img]i/expressions/face-icon-small-smile.gif[/img]
#155
04-19-2008, 05:26 PM
Extreme Pro Rider
THAT!!!!!Sounds down right sexy!
THAT!!!!!Sounds down right sexy!
Join Date: Dec 2001
Posts: 4,389
Likes: 0
Received 0 Likes
on
0 Posts
#157
04-20-2008, 01:22 AM
Join Date: Nov 2005
Posts: 3,940
Likes: 0
Received 0 Likes
on
0 Posts
Millenium Aluminum Sleeve Update
<div class="FTQUOTE"><begin quote>Originally posted by: AZSAND
Cool then that means @ 30 months and still counting on a turbo nitrous bike im doing ok with a sleeved motor.
Oh come on nut boy spit it out!!!!!!!!![img][/img]</end quote></div>
AZ - You know you only get to count a build from when you get it running right.........Lets see......that means your build is still brand new! [img]i/expressions/face-icon-small-happy.gif[/img]
Cool then that means @ 30 months and still counting on a turbo nitrous bike im doing ok with a sleeved motor.
Oh come on nut boy spit it out!!!!!!!!![img][/img]</end quote></div>
AZ - You know you only get to count a build from when you get it running right.........Lets see......that means your build is still brand new! [img]i/expressions/face-icon-small-happy.gif[/img]
#158
04-20-2008, 05:34 PM
Extreme Pro Rider
THAT!!!!!Sounds down right sexy!
THAT!!!!!Sounds down right sexy!
Join Date: Dec 2001
Posts: 4,389
Likes: 0
Received 0 Likes
on
0 Posts
#160
04-21-2008, 07:51 PM
Millenium Aluminum Sleeve Update
OK top end is off, Well it aint my Cylinder, Gasket , Head, its in the Bottom End, I am having the motor pulled to send to another member to be repaired, THE ALUMINUM CYLINDER IS FINE!!!!!!
I will keep this thread up to date on the repairs.
ERBE/ AKA Mitch
I will keep this thread up to date on the repairs.
ERBE/ AKA Mitch